Senoko changes EVT to DVT

From Studio Kousagi Wiki
Revision as of 12:18, 14 October 2013 by Bunnie (talk | contribs) (Created page with "=Senoko EVT to DVT changes= This is a list of all the changes applied to the board from EVT1 to DVT1 release. If it's not on this list, it didn't happen. Each change has the for...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Senoko EVT to DVT changes

This is a list of all the changes applied to the board from EVT1 to DVT1 release. If it's not on this list, it didn't happen.

Each change has the format of issue summary/resolution, and specific change

ECO1: Add switch for MCU programming authorization

As part of connector refactor, PM_REFLASH_ALRT is disconnected from the CPU, preventing the CPU from putting the MCU into a code download mode. Instead, add a switch where if the user presses the button simultaneous to the CPU resetting the MCU, the MCU can enter a code download mode.

EVT DVT Notes
Added SW101 TL3342F160QG/TR