Novena/Debian Wheezy Bootstrap

From Studio Kousagi Wiki
Revision as of 11:10, 10 July 2014 by Jimmy Tang (talk | contribs)
Jump to: navigation, search

Debian Wheezy Debootstrap

A VERY ROUGH SET OF INSTRUCTIONS, RUN WITH CARE

This set of instructions assumes you have a functioning Novena board with Debian Wheezy. These instructions are primarily for people who want to re-create the firmware/base image. It relies on various bits and pieces of information on this wiki.

Prerequisites

  • An existing Novena board running Debian Wheezy .
  • Root access on your board, ideally have sudo access with no password.
  • A 4gb microsd card.
  • A reasonably fast network connection.
  • Approximately 10gigs of free diskspace (more is probably better so you can cache things during testing/dev) - ideally get a SSD plugged into the board.
  • Assumes 'you as a user' has tried building a linux kernel, u-boot etc...

Summary