Difference between revisions of "Novena/Debian Wheezy Bootstrap"

From Studio Kousagi Wiki
Jump to: navigation, search
(Created page with "== Debian Wheezy Debootstrap == **A VERY ROUGH SET OF INSTRUCTIONS, RUN WITH CARE** This set of instructions assumes you have a functioning Novena board with Debian Wheezy. The...")
 
Line 1: Line 1:
 
== Debian Wheezy Debootstrap ==
 
== Debian Wheezy Debootstrap ==
  
**A VERY ROUGH SET OF INSTRUCTIONS, RUN WITH CARE**
+
'''A VERY ROUGH SET OF INSTRUCTIONS, RUN WITH CARE'''
  
 
This set of instructions assumes you have a functioning Novena board with Debian Wheezy. These instructions are primarily for people who want to re-create the firmware/base image.
 
This set of instructions assumes you have a functioning Novena board with Debian Wheezy. These instructions are primarily for people who want to re-create the firmware/base image.

Revision as of 11:02, 10 July 2014

Debian Wheezy Debootstrap

A VERY ROUGH SET OF INSTRUCTIONS, RUN WITH CARE

This set of instructions assumes you have a functioning Novena board with Debian Wheezy. These instructions are primarily for people who want to re-create the firmware/base image.

Prerequisites

  • An existing Novena board running Debian Wheezy .
  • Root access on your board, ideally have sudo access with no password.
  • A 4gb microsd card.
  • A reasonably fast network connection.
  • Approximately 10gigs of free diskspace (more is probably better so you can cache things during testing/dev) - ideally get a SSD plugged into the board.