Fernvale Breakout v1 to v2 ECO

From Studio Kousagi Wiki
Revision as of 17:52, 7 March 2015 by Bunnie (talk | contribs) (Created page with "This is a list of all the changes applied to the board from v1 to v2 of the breakout board. Each change has the format of issue summary/resolution, and specific change. ==ECO 1...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This is a list of all the changes applied to the board from v1 to v2 of the breakout board.

Each change has the format of issue summary/resolution, and specific change.

ECO 1: Add vibrator breakout

A pair of wire pads for the vibrator motor were added to the design. The through-hole pads are 2.5mm apart and meant to have a vibrator motor soldered into the holes.