Novena AFE
Notes on Novena AFE
EVT bringup notes
- R17P is wrong. The current value of 45k sets the output to 3.3V. Should be 52.3k to set the output to 3.7V
- R21C, R20C is too weak. Set to 1k to overcome the internal bias on SP0,1
Loop filter tuning
Generated using ADIsimCLK - save file ad9520-3-calck.clk
- R38C 1500pF -> 82pF
- R23C 3k -> 2.7k
- C37C 4.7uF -> 3.3nF
- R25C 2.1k -> 1.3k
- C36C 2200pF -> 270pF
- Loop bandwidth: 102 kHz
- Phase margin: 43.6 deg
- Zero: 37.1 kHz
- Pole: 275 kHz
- Last pole: 951kHz
Estimated phase noise and jitter to ADC:
Frequency: 1.00000GHz Broadband Jitter (>1kHz) = 558fs rms SNR = 69.10dB ENOB = 11.52bits at IF Freq = 100MHz Integrated Phase Noise from 100kHz to 1.25MHz Timing Jitter = 302fs rms Phase Jitter EVM = 0.19 %rms Phase Jitter = 0.109 degrees rms ACI / ACR = -57.5dBc Delay from Ref to OUT3 is 250ps