Difference between revisions of "Command line wifi configuration"
| Line 22: | Line 22: | ||
/etc/init.d/NetworkManager restart | /etc/init.d/NetworkManager restart | ||
</code> | </code> | ||
| + | |||
| + | This should get your device onto the wifi network with the specified SSID and encryption mechanism. Other example network_config templates: | ||
| + | |||
| + | '''open'''' | ||
| + | <configuration allocation="dhcp" encryption="NONE" auth="OPEN" hwaddr="" ssid="ChumbyTest" type="wlan" /> | ||
| + | |||
| + | '''WEP''' | ||
| + | <configuration type='wlan' ssid='wepAP' allocation='dhcp' auth='WEP' key='1234567890' encoding='hex' encryption='WEPAUTO'/> | ||
| + | |||
| + | '''WPA2''' | ||
| + | <configuration allocation="dhcp" encryption="AES" auth="WPAPSK" key="foobar" ssid="yourssid" type="wlan" /> | ||
Revision as of 16:27, 3 January 2012
If you don't have a remote control for your NeTV, or you lost it, you can still configure wifi.
Do the following:
- Plug NeTV into the USB port of your computer
- wait for NeTV to boot and register as an ethernet device.
- ssh to 10.0.88.1 as root
- from here, you will need to do the following:
cd /psp
cat > network_config
<configuration allocation="dhcp" encryption="AES" auth="WPAPSK" key="foobar" ssid="yourssid" type="wlan" />
^D
killall hostapd
killall dnsmasq
/etc/init.d/NetworkManager restart
This should get your device onto the wifi network with the specified SSID and encryption mechanism. Other example network_config templates:
open'
<configuration allocation="dhcp" encryption="NONE" auth="OPEN" hwaddr="" ssid="ChumbyTest" type="wlan" />
WEP
<configuration type='wlan' ssid='wepAP' allocation='dhcp' auth='WEP' key='1234567890' encoding='hex' encryption='WEPAUTO'/>
WPA2
<configuration allocation="dhcp" encryption="AES" auth="WPAPSK" key="foobar" ssid="yourssid" type="wlan" />
