Topic: MT6260 Fernvale - Add GSM features

Developing GSM stack for fernvale board

Re: MT6260 Fernvale - Add GSM features

I have stripped down osmocom-bb firmware working on fernvale, just serial and blinky light. Been working on layer1 firmware for sciphone dream g2 (mtk6235) since there are better docs available for that and I suspect I can leverage that work for fernvale and other 6260/6261 based devices. Look at sciphone-txburst (most recent work) and mtk-layer1 (a bit stale but directed at fernvale) here https://gitlab.com/unrznbl/osmocom-bb

What are you asking about or looking for? Or are you developing a stack?

Re: MT6260 Fernvale - Add GSM features

Hi !
I started developing new RTOS based MT6260MA(SmartWatch A1). I found control vibrator from source code. 0xA0700000 + 0x01B0 with set of 0x1 motor enabled. So, next step is developing display LX7789 240x240. Step by Step I develop new RTOS

Re: MT6260 Fernvale - Add GSM features

Hi craig_comstock !
How can I join to develop osmocom-bb based MTK?
which skill need I learn?

Re: MT6260 Fernvale - Add GSM features

I think the best thing to do is find a place to be public with your work. Share your discoveries, source code, problems. This is my plan as well. I am currently working mostly on https://osmocom.org/projects/baseband/w … oneDreamG2 and https://osmocom.org/projects/baseband/wiki/Fernvale. I hope to make many updates there soon from my recent work.