Topic: Verify the u-boot version when booting
I want to find out which u-boot version is used when booting.
Comparing the boot screen with the deb package confuses me:
The boot screen with the single penguin shows for a second "2015.04.r1". Is this is the u-boot version?
When looking at the "installed" deb package I see version 2014.10.r8-novena1.
According to the Kosagi wiki  and the novena guide  will the u-boot-novena bootloader package install itself on /boot when updating the system via apt. AFAI understand do both web sites assume that the Novena runs only from sd card (and not from SATA with the corresponding flag set in novena-eeprom-gui).
Because my Novena board runs from a SATA drive, and because the instructions of  can not be used word-by-word when using a hard drive (e. g. to install the kernel you have to write to the mounted the sd card instead to /boot), I am not sure if a new u-boot version is automatically installed when running an update via apt.
How do I find out, which u-boot version is really used at startup?