1 (edited by photomattmills 2016-10-11 09:44:49)

Topic: eDP adapter board with retina display

I just bought this LCD: http://www.ebay.com/itm/310704041171 (mentioned in one of the earlier updates to novena on bunnie's blog), and I was wondering (with suitable cables, of course) if it will work with the eDP adapter board? According to the datasheet, it's a standard 40-pin eDP connector. On the adapter board, it's a 30-pin connector, so I assume some of them are redundant. Is that the case? The schematics in KiCad don't make a ton of sense, because of missing libraries. I think I may need a different power source for the 48v backlight, but I'm not sure. Thoughts?