• Registered: 2016-05-03
  • Posts: 2

Topic: Novena EMI/EMC test

Hello!

Does anyone know if Novena main PCB board its was subjected to EMI/EMC tests? I'm planning to make small changes into the whole project, so if there some tips about EMI/EMC performance, would be nice!

Thanks in advance,
Chris

  • xobs
  • Administrator
  • Offline
  • Registered: 2014-05-25
  • Posts: 442

Re: Novena EMI/EMC test

We just followed "best practices", never did full EMI testing since it costs a few thousand dollars.

  • Registered: 2016-05-03
  • Posts: 2

Re: Novena EMI/EMC test

Thanks xobs! My pretensions concern the use of Novena main board in medical equip, precisely, I pretend use-it in a multi parametric monitor. There are any issues about copyright and licenses?

Thanks a lot,
Chris

  • xobs
  • Administrator
  • Offline
  • Registered: 2014-05-25
  • Posts: 442

Re: Novena EMI/EMC test

It's licensed under the Open Hardware license noted on the PCB and the schematics.  There is a provision for derivative works, and in fact I know at least one project that used the core in a medical device.  I don't think it ever made it through production.