Difference between revisions of "Palawan DVT"
(Created page with "Palawan DVT represents a complete redesign. The main MCU has changed, and we now use a SoM for the radio. ==Palawan Rx ECOs== *ECO1*: The LED is backwards, and should be fl...") |
|||
| Line 4: | Line 4: | ||
*ECO1*: The LED is backwards, and should be flipped around. | *ECO1*: The LED is backwards, and should be flipped around. | ||
| + | *ECO2*: RFM69HW DIO0 is connected to a pin that cannot generate an interrupt. Move DIO0 to PTA10, PTA11, or PTA12. | ||
| + | |||
| + | ==Palawan Tx ECOs== | ||
| + | |||
| + | *ECO1*: There is a stray via on the board. Run DRC prior to exporting to gerbers to repour copper. | ||
| + | *ECO2*: RFM69HW DIO0 is connected to a pin that cannot generate an interrupt. Move DIO0 to PTA10, PTA11, or PTA12. | ||
Revision as of 08:56, 8 June 2017
Palawan DVT represents a complete redesign. The main MCU has changed, and we now use a SoM for the radio.
Palawan Rx ECOs
- ECO1*: The LED is backwards, and should be flipped around.
- ECO2*: RFM69HW DIO0 is connected to a pin that cannot generate an interrupt. Move DIO0 to PTA10, PTA11, or PTA12.
Palawan Tx ECOs
- ECO1*: There is a stray via on the board. Run DRC prior to exporting to gerbers to repour copper.
- ECO2*: RFM69HW DIO0 is connected to a pin that cannot generate an interrupt. Move DIO0 to PTA10, PTA11, or PTA12.
